Unpacking The Device - Kaco blueplanaet 150 TL3 Operating Instruction

Fig. 6: Free-standing mounting under PV system
6.2

Unpacking the device

CAUTION
Risk of injury caused by excessive physical strain.
Lifting the device, for transport, relocation and assembly, can result in injuries (e.g. back injuries).
› Only lift the device using the openings provided.
› The device must be transported and installed by at least 2 persons.
1
6
5
4
Fig. 8: Open the package
Key
1 Cover
2 Side section - upper
3 Clamp (4x)
↻ The device is transported to the installation location.
1 Remove the plastic band from the pallet and packaging.
2 Pull the clamp off the packaging.
3 Pull the hood upwards to remove it and place the cardboard packaging to one side together with the mount and ac-
cessories.
4 Set the unit with base and side sections upright.
5 Remove the top side section and base from the device.
» If the unit is in the correct installation position: Proceed with the installation of the mount.
Page 16
Fig. 7: Mounting instruction under PV system
2
3
DETAIL Z4:1
Fig. 9: Raise the device
4
5
6
KACO blueplanet 87.0 TL3 KACO blueplanet 92.0 TL3 KACO blueplanet 110 TL3 KACO blueplanet 125 TL3
300 mm
Base
Side section - lower
Cardboard packaging with mount and mounting kit
KACO blueplanet 137 TL3 KACO blueplanaet 150 TL3