Integrating The Inverter Into The Customer Wlan Network - Kaco blueplanet 3.0 NX1 M2 Manual

Hide thumbs Also See for blueplanet 3.0 NX1 M2:
Table of Contents

Advertisement

1.5 Integrating the Inverter into the customer WLAN Network

WLAN of your mobile device is activated,
and the existing customer WLAN network
router is switched on.
 "KACO NX Setup" APP is installed and
opened from Android/ iOS Store on your
mobile device.
 Communication device is plugged into the
COM2 port of the device. (See manual of
the inverter - chapter Connecting
interfaces)
Note: Each unit of the unit series must be
configured with the enclosed communication
device. There is a fixed assignment to the
device afterwards.
 Access data for the customer WLAN
network must be provided by the
customer.
1. Select <Commissioning>
2. Grant permission to use images, videos
and camera.
3. Scan the QR code on communication
» The connection to the hot-spot WLAN is
device.
established (B0...).
Note: The connection exists exclusively via
the hotspot until step 6. This is how long
your mobile end device must be kept near
the communication device
4. Confirm the communication device with
<Join>.
Note: After a short time, you will get 2.
options in <Network Configuration>.
Option 1- Integrate the communication
device into the local customer WLAN
network.
Option 2 - Continue to use isolated
hotspot. (Follow immediately chapter 1.6
on Page 5)
5. Your customer must now select their
own network and enter their password*
for this network and click on the
<Confirm> button.
Note: If the connection fails, the
communication device is not within range
of the client router. You can improve the
signal quality between the communication
device and the router by connecting a
repeater. However, this repeater must also
be connected to the same network
Page 3
Fig. 6.
Select <Commissioning>
Fig. 8.
Access with mobile device to the
communication device
KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2
Fig. 7.
Scan QR code on
communication device
Fig. 9.
Entering access data for the
customer WLAN network

Advertisement

Table of Contents
loading

Table of Contents