Kaco Powador 2002 Operating Manual page 38

Hide thumbs Also See for Powador 2002:
Table of Contents

Advertisement

Configuration and Operation
Country-spec.
Menu
Setting
level
1
2
2
3
All countries
1
2
2
3
1
2
2
3
1
2
2
3
EN
1
2
2
3
1
2
2
3
All countries
1
2
2
3
Page 38
Display/
setting
Interface
Inverter address
S0 interface
Activate priwatt
Set priwatt
Power Boost
Quick start
Action in this menu/meaning
A selection is possible only if both RS232 and RS485
interfaces are installed.
 The interface is changed by pressing "2".
Every inverter must have a unique address. The interface
is used to communicate with the Powador-proLog.
 By pressing key "2", the RS485 address can be set con-
secutively from 1 to 32.
Selection of pulse rate for the S0 interface 500, 1000 and
2000 pulses/kWh
 Set pulse rate.
Releases the use of the fault signal relay for the Powador
priwatt internal consumption control relay.
1.
Enter the password.
(See Section 8.1.4 on page 34)
2. Confi rm what you have entered using key "1".
3. Activate or deactivate the home grid-feed function.
NOTE: Activating this option enables the menu item "Set
Powador-priwatt".
 Defi ne the switch-on power in kW that needs to be
available on an uninterrupted basis for 30 minutes
before the home feed-in is activated.
 Defi ne the switch-on time (operating time of
Powador- priwatt after activation).
NOTE: This menu item is only available if you have
selected the "On" option for the "Activate priwatt" menu
item in the "Settings" menu.
Off ers the option of reducing the frequency of the IGBT
bridge from 17 kHz to 9 kHz to improve effi ciency.
 Power Boost mode is activated by pressing "2".
NOTE: The change may cause operating noise.
Menu item is displayed only when waiting for grid feed
and during ramp-up limiting.
Off ers the option of ramping up the inverter faster for
inspection or testing.
If there is insuffi cient PV array power, the inverter stops
feeding into the grid after a short period of time.
 If the function is disabled, the display runs through
the menu level and when key "1" is pressed again it
shows the software version.
Operating Instructions for Powador 2002-6002_EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powador 5002Powador 6002Powador 3002Powador 4202

Table of Contents