Kaco Powador 2002 Operating Manual page 20

Mounting the Inverter
Authorised electrician
Figure 10: Instructions for wall mounting
Fasten wall holder to mounting location
5. Mark the positions of the drill holes using the cut-outs in the wall holder.
NOTE: The minimum clearances between two inverters, or the inverter and the ceiling/fl oor have already been
taken into account in the diagram (see Figure 11 on page 20).
6. Fix wall holder to the wall with the mounting fi xtures.
Make sure that the wall holder is oriented correctly.
Clearance from the ceiling: 500 mm
Clearance from any other inverter:
700 mm
2 5
0 m
m
Clearance from the fl oor 500 mm
Clearance from any other inverter: 700 mm
Figure 12: Minimum clearances/mounting plate
Key
1 Fixings for mounting
2 Mounting plate
3 Screws for mounting
Page 20
Figure 11: Drill stencil for wall mounting with mini-
5
4
2 5
0 m
m
4
5
405
565
1386
328
1120
mum clearances (in mm)
1
2
3
Safety catch
(open)
Suspension bracket
Safety catch
Operating Instructions for Powador 2002-6002_EN
Safety catch
(closed)