Menu Of Inverter - Kaco blueplanet 3.0 NX1 M2 Manual

9.9 Menu of Inverter

9.9.1 Viewing the Instantaneous values
The required device is selected in

<Available inverters> and the <Inverter
values & settings> menu is opened.
1. Select < Instantaneous values> and
view information about the installation.
Note: All measured values for your PV
system and the grid power are
displayed. In addition, after solar feed-
in, the daily values and yields are
displayed.
Note: The measured values are only
displayed for the selected device. A
simultaneous evaluation of all inverters
can only be carried out via our
"blueplanet web" monitoring portal.
2. View current Power and Power Factor.
3. View pending errors via <Error Code>.
N/A = no error
Note: In the event of a pending error,
note the Error code list in chapter 10.5
on page 57.
9.9.2 Authorisation to change parameters
 <Live values and settings> menu has been
opened from <Available Communication
units> and <Find inverter>.
1. Open <Parameter settings> to set the
parameters for initial start-up.
Important: No password is required for
initial parameter setting.
A password must be entered if it becomes
necessary to change the parameters of the
device after initial start-up (security
function). The specific password for the
inverter must be requested from KACO
Service.
2. Enter the password in the <Password>
field and confirm with <Confirm>.
Fig. 72.Warning issued only on the first
accidental abort attempt.
Page 37
Fig. 70.Viewing the live values
Fig. 73.Select parameter settings
KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2
Fig. 71.Overview of power values
Fig. 74.Authorisation required