Removing And Storing The Retainers - Roland Metaza MPX-90 User Manual

Removing and storing the retainers

Retaining materials are attached to protect the machine from vibration during shipment. Remove these
after emplacement.
 Remove all Retaining materials. Any that remain may cause faulty operation or breakdown when the
power is switched on.
 The retaining materials and package are required when moving the machine to a different location. Store
them carefully so that they do not get misplaced.
Removing the retainers
Screws
Retainer
Storing the retainers
Keep the retaining materials by mounting them to the position shown in the figure.
Retainer
Chapter 2 Installation and Setup
2-1 Installation
Screws
21