Table of Contents
Advertisement
1-2 Names and Functions
Head (MPH-90)
Material Retainers
Adhesive sheet
Center vise
16
Chapter 1 Getting Started
Printing is performed on material using
marking pins. Diamond is attached to the
tip of the marking pins. Since the head is a
consumable part, replace it at an appropri-
ate timing.
P. 94, "The Replacement Cycle for the Head"
Marking pins
This is used to fix material on a table. Mate-
rial is placed on the adhesive sheet, which
then holds the material in place. This lets you
immobilize objects without having to use
commercially available tape or the like.
P. 33, "Loading Material Using the Adhesive
Sheet"
This is a vise made of plastic, and secures
material in place by clamping it. This makes it
possible to immobilize material that cannot
be secured using the adhesive sheet, such
as items having a curved bottom surface.
The act of securing an item in place also
accurately determines the center position
in the horizontal direction.
P. 38, "Loading Material Using the Center
Vise"
Advertisement
Table of Contents
