The on-screen table scale corresponds to the scale for the center vise as shown in the figure. Adjust the
position of the material to enable the text to be printed at the location you want.
P. 38, "Loading Material Using the Center Vise"
4-5 Printing on a Curved Surface
Click
.
Press the <→> key on the key-
board.
The result becomes as shown in the figure.
Enter text remained.
Move the text to any position of
your preference.
P. 60, "Adjusting the Location, Size, or Angle
of a Text" "
Chapter 4 More Advanced Operations
77