Table of Contents
Advertisement
4-5 Printing on a Curved Surface
Make sure [Roland MPX-90] is
chosen as the printer name.
Click [Properties].
Click the [Material] tab.
Set [Diameter] to 10 millimeters.
Select [Direction].
Make horizontal writing on portrait mate-
rial.
Vertical
Horizontal
In this example, select (vertical).
Click [Enter].
Under [Work Size], the value for [Width] is
set automatically.
For [Length], in this example, make the set-
ting of 50 millimeters.
Click [OK].
Click [OK].
This is the end of the printing area setting.
Chapter 4 More Advanced Operations
75
Advertisement
Table of Contents
