Adjusting Marking Pins; Checking The State Of The Marking Pins - Roland Metaza MPX-90 User Manual

5-2 Adjusting Marking Pins

Checking the State of the Marking Pins

MPX-90 Head Manager shows the amount of pin usage.
If the indicator for the pin you're using is red, then replace it with a new head. If attractive printing is impos-
sible or printed images are uneven even though the scale is not red, then change to a new head.
 P. 96, "How to Replace the Head," p. 101, "The printed image is unattractive," p. 102, "The image is uneven"
Procedure
 From [Start] menu, click [All Programs] (or [Programs]) → [MPX-90 Head Manager]
→ [MPX-90 Head Manager].
MPX-90 Head Manager starts.

Switch on the power to the machine.
 P. 28, "Switching On the Power"
86
Chapter 5 Maintenance and Adjustment
This indicates the amount of pin usage.
The indicator display increases a little
at a time as striking is performed. The
rate of increase varies according to the
material printed. A head needs to be
replaced when it is shown in red.
This refreshes the screen to display
the latest information.