Roland Metaza MPX-90 User Manual page 36

3-2 Getting Ready

Mounting the Adhesive Sheet
 Place it straight, aligned with the scale marks on the table.
 Place inside the table frame.
 Be careful not to allow any air bubbles to form between the adhesive sheet and the table.
Handling of the Adhesive Sheet
 If the adhesive force has been reduced, then wash the adhesive sheet.
 P. 84, "Cleaning the Adhesive Sheet"
 Never rub the surface with force. Doing so may damage the surface and reduce its adhesive strength.
How to Place Material
When material is small enough to be placed within the table
Adhesive
sheet
Material
Continue on the next page
34
Chapter 3 Making Prints
Center Line
Center of the
material
Center Line
Affix the adhesive sheet to the
table.
Mount the material on the sheet.
Press down lightly on the material to secure
it in place.
Place the material at the center of the scale
on the table.