Setting Up The Machine; Step 1: Removing The Retainers - Roland VersaUV LEF2-200 Setup Manual

Setting Up the Machine

Step 1: Removing the Retainers

Retainers are attached to the machine to protect it from vibration during transportation. When
installation is complete, remove these.
WARNING
IM P O RTA NT
• Make sure to remove all the retainers. Any that remain may cause faulty operation or breakdown
when the power is switched on.
• Store the retainers carefully because they are needed again when transporting the machine.
• For transportation of this machine, contact your authorized Roland DG Corporation dealer.
Retainer B
You can store the retainers in the locations indicated in the illustration. Use the screws previously
attached to the retainers to attach them to the machine.
Inside
Retainer A
Screw
Carry out these operations before you connect the power cord.
Inadvertent powerup may result in pinched hands or other injury.
Retainer A
Screw
Retainer B
2.Installation
23