Table of Contents
Advertisement
When the setting window of METAZA Driver for METAZAStudio is displayed, the values for any settings
made there are temporary, and are not saved.
P. 79, "Keeping the settings of METAZA Driver"
5-4 Adjustment of the Origin-point Location
Click the [Material] tab.
In the width and length fields for
[Offset], enter the displacement val-
ues you noted in step
In the case of the figure in step
-0.5 in [Width] and 0.5 in [Length].
Click [OK].
The window closes.
Chapter 5 Maintenance and Adjustment
.
, enter
93
Advertisement
Table of Contents
