Installing The Hpx-P200-Xx Power Outlet Module; Disconnect The Iec C-14 Power Inlet Connector On The Hydraport Base Assembly - AMX HPX-1600 Installation Manual

HPX-P200-xx Power Outlet Module
HPX-P200-XX Specifications (Cont.)
Weight:
• HPX-P200-US
• HPX-P200-EU
• HPX-P200-UK
• HPX-P200-AU
Enclosure:
Rear Connections:
Compatibility:
Included Accessories:

Installing the HPX-P200-XX Power Outlet Module

Disconnect the IEC C-14 Power Inlet Connector On the Hydraport Base Assembly

Ensure that the AC Power cord is disconnected from IEC C-14 power inlet
connector on the Hydraport Base Assembly prior to disassembly of the
Hydraport Base assembly or installation of the HPX-P200-XX Power Outlet
Module (see FIG. 25).
FIG. 25
HPX-1600 - Power Inlet Cord Removed
28
60g (2.12 oz.)
69g (2.43 oz.)
74g (2.61 oz.)
60g (2.12 oz.)
Matt black finished face plate (Polycarbonate plastic).
Three position plug-in connector for use with HPX-1600 Hydraport Base Assembly.
• HPX-1600 Hydraport Base Assembly
• HPX-PAK-US, Hydraport Power Accessory Kit w/ US power cord (FG559-31)
• HPX-PAK-I, Hydraport Power Accessory Kit w/ no power cord (FG559-32)
Quick start guide
Power Inlet Connector
on HPX-1600
AC Power Cord
HPX-1600 Retractable Connection Port