Step 1 - Connect the HPX-P200-xx to the HPX-1600 Power Inlet Assembly
Plug the 3-Position Connector from the Power Outlet Module into the Power Inlet Assembly located in the
bottom cover of the HPX-1600 Base Assembly (FIG. 26).
3-Position Connector
from Power Outlet Module
AC Power connector
FIG. 26
HPX-1600 Bottom Cover - Connect Power Outlet Module to Power Inlet Assembly
Step 2 - Insert the Power Outlet Module Into the HPX-1600 Chassis
Insert the HPX-P200-XX Power Outlet Module into the main chassis of the HPX-1600 Base Assembly.
Note the position of module interlock tab: this tab should face towards the bottom of the HPX-1600 Base
assembly when installed in its mounted position (FIG. 27).
FIG. 27
Inserting the Power Module into the HPX-1600 Chassis
HPX-1600 Retractable Connection Port
HPX-P200-xx Power Outlet Module
HPX-1600
Power Inlet Assembly
Bottom Cover
(inside view)
HPX-1600
Base Assembly
(bottom)
Power Outlet Module
Module Interlock Tab
29