Table of Contents
Advertisement
Installing the HPX-1600
Circuit Breaker Connector
AC Power connector
AC Power connector
FIG. 13
Bottom Cover - Connect each AC power module to the power inlet assembly
2.
Ensure the Power Inlet Assembly Chassis Ground Lug is secured tightly to the HPX-1600 Chassis using
the included grounding screw (FIG. 14).
Grounding screw
Grounding screw
Power Inlet Assembly
Chassis Ground Lug
FIG. 14
Installing the Bottom Cover
3.
Route the remaining cables out of the bottom cover using the four square holes provided in the bottom
cover.
16
connects here
mounting screws
HPX-1600 Retractable Connection Port
AC Power connector
AC Power connector
Bottom Cover
(inside view)
HPX-1600 Chassis
Aluminum Frame (bottom)
Bottom Cover
Advertisement
Table of Contents
