Installing the HPX-1600
ATTENTION READ THIS FIRST!
Only a professional, AMX-qualified installer should perform this installation.
Installation must conform to all local codes.
This product may not be installed by the end-user.
A typical installation will include several of various available modules listed in the Product
Specifications section on page 2. Each of these modules has specific instructions for terminating their rear
connections. Refer to the installation guide for each appropriate module during the installation of the
Hydraport system.
Step 1 - Select an Installation Location
Note the space requirements for installing the system. FIG. 3 provides a dimensioned drawing of the
HPX-1600 System (above and below the table).
FIG. 3
HPX-1600 Space Requirements
HPX-1600 Retractable Connection Port
Read these instructions in their entirety before beginning the installation.
The installation requires specific steps to be performed the specified order.
Installing the HPX-1600
7