Table of Contents
Advertisement
Installing the HPX-1600
Cross-section view of Bottom Cover
FIG. 11
Bottom Cover - Connect each AC power module to the power inlet assembly
8.
The included circuit breaker modules should also be connected to the Power Inlet assembly at this time.
International units (FG550-BL, FG550-SL) include two circuit breakers for line and
neutral. Both circuit breakers are required for operation. Take care while routing the
wires to the circuit breaker positioned on the opposite side of the chassis from the
two circuit breaker connectors on the Power Inlet assembly(see FIG. 11)
Refer to the Installation Guides provided with each Module for detailed installation instructions.
14
showing cable routing
Bottom Cover
(inside view)
HPX-1600 Retractable Connection Port
Advertisement
Table of Contents
