Step 9 - Install Power Cord (If Required) - AMX HPX-1600 Installation Manual

Step 9 - Install Power Cord (If Required)

If AC power modules are to be used in International models (FG550-BL, FG550-SL), install a suitable
14AWG power cord into the provided IEC 320 C14 socket.
North American models (FG550-01-BL, FG550-01-SL) include a pre-attached power cord with metal
retention bracket. If this bracket has been removed during installation, reinstall it at this time. The metal
retention bracket is required to maintain North American Product Safety Certifications.
Fold the power cord back 180 degrees, and secure it to the far side of the bottom cover using the supplied wire
ties. (FIG. 21).
FIG. 21 Installing the Power Cord
Insure the resulting service loop is tight enough so that it does not rub the shields
when the unit moves up and down.
HPX-1600 Retractable Connection Port
#4 Plastite screws
(provided)
Power Cord
Installing the HPX-1600
AC Power Socket
23