Table of Contents
Advertisement
3 Preparing and using for the first time
3 Preparing and using for the first time
Setting up the machine
Filling the bean container
CAUTION
Determining the water
hardness
10
Choose a spot for your X4 which protects the machine against
T
overheating� Ensure that the ventilation slots are not covered�
Place the X4 on a horizontal surface that is not sensitive to
T
water (minimum height of 80 cm)�
The aroma preservation cover of the bean container is lockable
(spanner supplied as standard)�
Coffee beans which have been treated with additives (e�g� sugar),
ground coffee or freeze-dried coffee will damage the grinder�
Only use roasted, untreated coffee beans to fill the bean
T
container�
Remove the aroma preservation cover�
T
Fill the bean container with coffee beans and close the aroma
T
preservation cover�
When you use the machine for the first time, you must set the water
hardness� If you know the hardness of your water, go straight to the
next section� If you do not know the water hardness, you can find
this out first:
Hold the Aquadur® test strip supplied under running water for
T
one second� Shake off the water�
Wait for about 1 minute�
T
You will then be able to read the degree of water hardness from
T
the discolouration of the Aquadur® test strip and the descrip-
tion on the packaging�
Advertisement
Table of Contents
