Table of Contents
Advertisement
4040
Code
Message or Symptom
58
Duplex not attached
59
Print Job on Disk
63
Unformatted Disk
64
Defective Disk
80
Scheduled Maintenance
Diagnostic Information
The diagnostic information in this chapter is divided as follows:
•
Base Machine Service Checks
•
Print Quality Service Checks
•
Paper Feed Service Checks
•
Paper Deck Service Checks
•
Paper Deck Paper Feed Service Checks
If you think your symptom is caused by a print quality failure go to
the
"Print Quality Symptom Table" on page
If you think your symptom is caused by a paper feed failure, go to the
"Paper Feed Symptom Table" on page
If you think your problem is caused by a malfunction in the paper
deck go to
"Paper Deck Service Checks" on page
Action
Be sure the duplexer is securely
latched into the printer.
POR to reset the printer.
No service required, refer to oper-
ator manual.
Format the disk. Go to
Aids" on page 3-1
device tests.
Replace the defective disk. Go to
"Diagnostic Aids" on page 3-1
format the new disk .
No service required, refer to oper-
ator manual.
The Maintenance Kit must be
ordered and installed by the cus-
tomer. Part numbers can be found
in the User's Guide.
This message appears each time
the printer is turned on.
2-11.
2-12.
2-53.
Diagnostic Information 2-9
"Diagnostic
and run the
to
Advertisement
Table of Contents
