4040
Pick-Up Board Removal
1. Remove the pick-up assembly.
2. Disconnect the 6 connectors (1).
3. Remove the screw (2), disconnect the 2 latches (3), and take
out the pick-up board (4).
Multipurpose Tray Board Removal
1. Remove the manual feed pick-up assembly.
2. Remove the manual feed pick-up clutch.
3. Disconnect the 3 connectors (1).
4. Slightly lift the sensor lever and remove it from the cam.
5. Remove the screw (2) and disconnect the latch (3). Take out the
multipurpose tray board (4) being careful to avoid the sensor
lever.
Repair Information 4-60