Table of Contents
Advertisement
4040
failure, such as a guide, solenoid, clutch, motor, or gear, and you
should go to the appropriate service check.
It is important to know which paper path your printer is using when
the error code is generated. To check, clear all jammed paper and
turn the printer off. Press the two lower buttons on the operator
panel and turn the printer on. This puts the machine in the diagnos-
tic mode and allow you to test each paper path separately. You can
run one sheet of paper at a time to test each paper station. See
Diagnostic Mode in Diagnostic Aids to run the paper feed tests.
Locate your paper jam error code in the following tables and take the
indicated action.
2-46
Advertisement
Table of Contents
