Table of Contents
Advertisement
4040
Error
Symptom or Message
977
Network Card Error
980
Device Error, 2000- sheet
paper deck motor.
982
Device Error, Lifter malfunc-
tion in the multipurpose tray.
983
Device Error, Lifter malfunc-
tion, 200-sheet paper deck.
990
Service Duplex Option
2-6
Action
The system processor has
detected an INA card is installed
but cannot communicate with it.
The X after the card indicates
which one has the problem. Net-
work card 1 will always refer to the
INA in the bottom slot and Net-
work card 2 will always refer to the
INA card in the top slot.
Be sure the controller card riser
card is properly installed.
Be sure the motor is securely
installed. If necessary, replace
motor MT31 (26-3).
Be sure J214 is securely installed
to the system board. Be sure the
connectors on the multipurpose
tray board are installed correctly.
If necessary, replace the lifting
plate solenoid SL2 (14-6). If you
still have a failure, replace the
multipurpose tray board (14-20).
Be sure the lifter plate clutch
(CL31) connector (J206) on the
paper deck driver board is
securely installed. Check for bro-
ken parts. If necessary replace
the paper deck lifter clutch (26-5).
Be sure the duplex registration
motor cable is installed correctly.
Check for broken registration
parts. If necessary, replace the
duplex registration motor SMT22
(22-22).
Advertisement
Table of Contents
