4227-100
2. Diagnostic Information
Start
Make a quick visual check for defects (loose or broken parts,
unplugged connectors, or paper jams).
If there is no power after turning the printer on, go to the
Failure Service Check" on page
If an error indicator appears, go to the error indication table and take
the indicated action.
Run the
"Print Test" on page 3-5
3-6
for details of error indication information. If no error indication
appears, refer to the
2-26.
and refer to the
"Symptom Table" on page
"Error Log" on page
2-4.
Diagnostic Information 2-1
"Power