Bent Leading Edge Of Paper Service Check - Lexmark Optra N 4040 Service Manual

4040
The following information explains troubleshooting for paper jams in
each of these assemblies. This section also covers multiple paper
feed, wrinkles, bent leading edge, and skewing. Locate your symp-
tom in the "Paper Feed Symptom Table" on page 2-12
indicated action.

Bent Leading Edge of Paper Service Check

Be sure the recommended paper is being used. The paper should
not be curled or wrinkled.
FRU
Paper Feed
1
Tray
2 Paper Guide
2-40
Action
There may be too much paper loaded in the
paper feed tray.
The paper guide may be worn or deformed.
Check the paper feed path, and replace the
guide if it is damaged or deformed (15-2, 15-
8).
and take the