Transfer Guide; Transfer Charging Roller; Static Charge Eliminator; Feed Guide - Lexmark Optra N 4040 Service Manual

4040

Transfer Guide

Clean the transfer guide with soft, dry flannel.

Transfer Charging Roller

Clean the transfer charging roller if it is very dirty. Do not touch the
roller or get solvents or oils on it when you clean it. Do not clean the
roller with water or solvents.

Static Charge Eliminator

Clean the static charge eliminator with the supplied cleaning brush.

Feed Guide

Clean the feed guide with a damp cloth.

Fuser

•
Fixing Entry Guide - Clean with a cloth moistened with MEK.
•
Fixing Separation Guide - To remove toner, use a cloth moist-
ened with MEK.
•
Fuser Separation Claw - To remove toner, use a cloth moist-
ened with MEK. Replace it if it is severely worn.

Service Checkpoints - Paper Deck

Pick-Up Roller, Separation Roller, Feed Roller

Clean the rollers with a slightly dampened cloth or a cloth moistened
with alcohol. Replace severely worn rollers.
6-3