Table of Contents
Advertisement
Bad Symbol Message
Bad Symbol Message
Note: Bad Symbol Message is not supported when Q-Mode is enabled.
Usage:
Useful in determining if a symbol is present and if user defined requirements
for that symbol are met. Can tell the user if a qualified symbol is present but
not decodable.
Sets the requirements that will qualify an object or a symbol before outputting a
Definition:
decode or message. When enabled, sends a message to the host whenever
an object meets the qualifications setup but is not decoded.
Note: When
is preceded by the identifier for the symbology being used.
Serial Cmd:
<K715,[unused],message>
Default:
BAD_SYMBOL
Options:
Up to 64 ASCII characters.
Important: The ASCII characters <, >, and
For <:
<K715h,,3C>
For >:
<K715h,,3E>
For
:
,
<K715h,,2C>
See
ASCII Character Entry Modifier
enter ASCII characters as hex values.
No Symbol Message
Note: No Symbol Message is not supported when Q-Mode is enabled.
Usage:
Useful in determining if a symbol is present and if user defined requirements
for that symbol are met. Can tell the user if an object does not qualify as a
symbol.
Definition:
Sets the requirements that will qualify an object or a symbol before outputting a
decode or message. When enabled, sends a message to the host whenever
an object meets the qualifications setup but is not decoded.
Note: When
is preceded by the identifier for the symbology being used.
Serial Cmd:
<K716,[unused],message>
Default:
NO_SYMBOL
Options:
Up to 64 ASCII characters.
Important: The ASCII characters <, >, and
For <:
<K716h,,3C>
For >:
<K716h,,3E>
For
:
,
<K716h,,2C>
See
ASCII Character Entry Modifier
enter ASCII characters as hex values.
7-10
Symbology Identifier
can only be entered as hex pairs:
,
on page 3-32 for a detailed explanation of how to
Symbology Identifier
can only be entered as hex pairs:
,
on page 3-32 for a detailed explanation of how to
is enabled, the Bad Symbol message
is enabled, the No Symbol message
Quadrus MINI Imager User's Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the Quadrus MINI Imager and is the answer not in the manual?
Questions and answers