Software - Martin Xciter User Manual

Attention: you can draw a maximum of 315 mA from this port. Check the specification of your desk
light before using it.

2.2 Software

Before Xciter can communicate with your PC or laptop, you need to install the USB drivers and
applications first. You can find them on the disk that comes with the Xciter. We recommend that you
get the latest applications from the Martin support site. They may contain newer firmware and new
fixture definitions.
1. Launch "install.exe" to install the drivers and PC applications.
2. Use the default directory or type in a new path.
3. Press "Install" to start the installation.
4. Some error messages may pop up if previous driver or application versions were found. Simply
ignore them by pressing "OK".
Xciter user manual
Installation
11