Table of Contents
Advertisement
Storing to memory
If you are using the same background scene a lot in the show, store and assign it only once to conserve
memory. You can assign it to other cue buttons in run mode (see extended dialog in run mode features). If
you store and assign the same scene to multiple buttons, Xciter will store a new file for each of those
buttons.
18.3 Store as playback scene
With this function you can store a playback scene and assign it to a fader.
1. Press {PB scene} in the store dialog. Xciter prompts you to select a fader bank and fader. Bank 101 is
selected by default. This first digit is the page: the second and third are the bank itself.
2. Use GP and NL1-20 to select a bank. You can see the current content of the selected bank on LCD2. If you
change your mind, you can keep selecting other banks until you find a bank with unassigned faders or with
a fader you want to overwrite.
3. Select a fader by pressing the corresponding SM bounce button.
4. Press [ENT] to confirm, [ESC] to cancel. If you have confirmed, Xciter will build a default name. You will
notice that Xciter has added a fourth digit behind the bank number. This is of course the fader number.
5. Use ARROW or SCR1 to move the cursor
6. Press (and hold) [CLEAR] if you want to input a new name.
7. Use NL1-10 to input numbers and NL 11-19 to input letters.
8. Press [ENT] to confirm storage or [ESC] to cancel. Upon confirmation, Xciter stores the current scene (the
scene that is visible) to memory and assigns it to the selected fader.
If you are planning to use the same playback scene in multiple banks, store and assign it only once to
conserve memory. You can assign it to other faders in run mode (see extended dialog in run mode
features). If you store and assign the same scene to multiple faders, Xciter will store a new file for each of
those faders.
18.4 Store as preset
1. Press {Preset} in the store dialog. Xciter prompts you to select a preset number.
2. Use GP and NL1-20 to select a preset. The number of the selected preset appears on LCD1. The first digit
is the page; the second and third are preset itself. Illuminated buttons already have preset in them.
3. Press [ENT] to confirm storage or [ESC] to cancel. Upon confirmation, Xciter stores the PAN / TILT values
of the current scene (the scene that is visible) to memory.
18.5 Update
Sometimes, when you are editing scenes or sequences, you only want to update them, not store them as
something new.
Press {Update} to update the scene, sequence or preset that you have just edited.
This option will only be available if you edit an existing item.
66
Xciter user manual
Advertisement
Table of Contents
