Chapter 9. Auto Start - Martin Xciter User Manual

Chapter 9. Auto start

When start is enabled, Xciter will run a certain cue list after startup. As you will see in the cue list editor,
you can also execute lamp procedures in the cue list.
Example: If the operator is late, other persons, who do not know the console, can still do a lamp on and
start up a small show with the auto start function. Of course you need to select a cue list with lamp
procedures to do this.
1. Press {Auto Start} in the setup menu to call the auto start dialog.
2. Use PG and NL 1-20 to select cue. The page and number of the selected cue appear on the bottom line.
3. Press [ENT] to confirm or [ESC] to cancel.
If you have confirmed, Xciter shows the message 'Auto start settings stored! Press any key!
Press any button to continue.
4. If you wish to disable the auto start feature, press [CLEAR].
5. Xciter asks for confirmation.
6. Press [ENT] to confirm or [ESC] to cancel.
7. Press [ESC] to exit the auto start dialog.
Xciter user manual
Auto start
33