Table of Contents
Advertisement
Access level
2. Press {Operator} to switch to operator mode.
3. Press {Dummy} to switch to dummy mode.
4. Press {Password} to change the password.
Use ARROW or SCR1 to move the cursor.
Use NL 1-20 to input letters and numbers.
Press [ENT] to confirm, [ESC] to cancel.
5. Press [STORE] to store the new access level.
6. Press [ESC] to leave the dialog.
10.2.2 From other to programmer
In a user mode other than programmer Xciter will ask for the programmer password when you try to enter
the setup menu.
7. Use ARROW or SCR1 to move the cursor.
Use NL 1-20 to input numbers and letters.
Press [ENT] to confirm, [ESC] to cancel.
8. If you have entered the correct password, the setup menu appears.
9. Press {Access level} in the setup menu.
10. Press {Operator} to switch to operator mode.
11. Press {Dummy} to switch to dummy mode.
12. Press [STORE] to store the new access level.
13. Press [ESC] to leave the dialog.
If you have forgotten or lost the password, you can erase it with the backup/restore PC application.
36
Xciter user manual
Advertisement
Table of Contents
