Export To Lib; Backup / Restore; Backup; Restore - Martin Xciter User Manual

Hands-on lighting control tool for djs and lighting operators

Hide thumbs Also See for Xciter:

Table of Contents

22.3.4 Export to lib

You can export a fixture definition from Xciter's internal library to the library on PC.

1. Select the fixture definition(s) you wish to export.

2. Press 'Export to lib'.

The application will place the fixture definitions in the 'library' folder. DO NOT change anything to the

structure of this folder. If you do, the library manager will not run properly and you will have to re-install the

PC software.

Use this application to backup Xciter's entire file structure to your PC or laptop. If something happens to

your show, you can restore it with the last backup you have made.

1. Make sure Xciter is connected to the PC.

2. Make sure the Xciter is booted.

3. Start the BR (Backup / Restore) application.

If Xciter is not detected, the software reports this. Press 'Rescan' if you want the software to scan for Xciter

again. If the software keeps giving an error message, contact the nearest Martin dealer for advice.

1. Press the 'Backup' button.

2. A file dialog should appear. You can specify the destination folder a file name. Press 'Save'.

3. The application will start backing up Xciter data. Wait until it reports 'backup successful' and 'xxx files

backed up'.

1. Press the 'Restore' button.

2. A file dialog should appear. Choose the backup file you wish to upload to the Xciter. Press 'Open'.

3. The application will start restoring the Xciter data. Wait until it reports 'xxx files restored'.

Xciter user manual

PC software

Table of Contents