Quick Edit During Show; Edit Sequence; Edit Background Scene; Edit Playback Scene - Martin Xciter User Manual

Hands-on lighting control tool for djs and lighting operators

Hide thumbs Also See for Xciter:

Table of Contents

Editing existing stuff

2. Use PG and NL 1-20 to select the preset number. There are 8 pages of 20 presets, giving you a total of 160

pan/tilt presets.

3. Press [ENT] to start editing or [ESC] to cancel. Press [CLEAR] to delete the selected preset. Xciter will ask

for confirmation.

19.2 Quick edit during show

To use the quick edit function, you need to be in cue mode and have a cue with content running.

Make sure you are in the basic dialog where the four sequences are visible.

Hold [EDIT] while you press the softkey on the left of the sequence you wish to edit. It is the softkey you

normally use to activate/deactivate the sequence (see basic dialog in run mode features).

Make sure you are in the extended dialog where the background scene is visible.

Hold [EDIT] while you press the softkey on the left of the background scene. It is the softkey you normally

use to activate/deactivate the background scene (see extended dialog in run mode features).

Scroll through the playback banks until you see the playback you wish to edit/

Hold [EDIT] while you press the SM bounce button under the corresponding playback. It is the softkey you

normally use bounce the playback.

Xciter user manual

Table of Contents