Martin Xciter User Manual page 79

8. Use PG and NL1-20 to select the cue you wish to run in the step.
9. Press [ENT] to confirm, [ESC] to leave unchanged.
10. Press {GO}, {WAIT}, {FOLLOW}, {GOTO}, {LOOP}, {LAMP_ON}, {LAMP_RESET} or {LAMP_OFF} to
change the step option.
11. Use ARROW or SCR1 to select another.
12. Press [ENT] to confirm or [ESC] to leave unchanged.
13. Depending on the step option you choose, you have to set different parameters. Example: 'WAIT' comes
the parameter wait time (WT).
14. Press the soft key next to the value of a parameter to select it.
15. Use ARROW or SCR1 to adjust the value.
16. Use [CLEAR] and NL 1-10 to input a new value.
17. Press [ENT] to confirm or [ESC] to leave the value unchanged.
18. Repeat steps 3-6 until you have built the cue list.
19. Press [STORE] to store the cue list to memory.
20. Press [ESC] to exit the cue list editor.
For more information on step options we refer to 'Xciter philosophy'.
Xciter user manual
Run mode features
79