Updating Software And Os; Maintenance; Cleaning The Product - Martin M1 HD Service Manual

Service manual

Updating software and OS

Update the software and OS according to the separate
installation procedures. You find the procedures on
martin.com.
You find the OS and M-Series software for your M1 HD
controller on
controllersupport.martin.com

Maintenance

Read the user manual before performing service or
maintenance on the product.
Failure to respect service and maintenance schedules
may cause damage that is not covered by product
warranties.

Cleaning the product

Do not use abrasive, caustic or solvent-based products
for cleaning, as they can cause surface damage.
• Vacuum or gently blow away dust and loose
particles from the front panel with low-pressure
compressed air.
• Remove any dust between the fader slots.
• Vacuum or gently blow away dust and loose
particles from within the base assembly with low-
pressure compressed air.
• Check the fan blades of the CPU fan and PSU
fan. Remove any dust build-up if needed and
make sure the fans can rotate gently. Never force
the rotation of the fans using compressed air.
• Wipe the touch-screen with a soft, lint-free cloth.
Apply gentle pressure only.
• Clean the five LCD buttons with a soft, lint-free
cloth.
M1 HD - Revision A, 05-16-2017
.
Figure 18: Read the user manual
12 of 13