Clear Cue List; Edit Cue List - Martin Xciter User Manual

Hands-on lighting control tool for djs and lighting operators

Hide thumbs Also See for Xciter:

Table of Contents

Run mode features

3. In the top left corner, you can see the number of the running cue list (the one you have just selected). The

number in the top right corner indicates the current step. The second line on the LCD shows the option that

is attached to the current step. On the third line you can see the current cue.

4. All transitions between steps are automatic, except for steps with the 'GO' option. When you see a GO on

the second line of the LCD, Xciter is waiting for an action from the user. The right arrow button starts

blinking. Press this button to proceed to the next step.

5. Press [CL] to stop running the cue list and return to the cue lost selection.

Note that you can also use playbacks in cue list mode and you can access the audio settings with [↕]. You can

adjust the audio settings the same way you do in cue mode.

20.6.2 Clear cue list

1. Make sure you have selected a list with content.

2. Press [CLEAR] to delete all steps in the list.

3. Press [ENT] to confirm, [ESC] to cancel. Xciter returns to cue list selection.

1. Make sure you have selected a list. It does not matter if it is empty or not.

2. Press [EDIT] to call the cue list editor.

3. Use ARROW or SCR1 to scroll through existing steps if there are any.

4. Press [LOAD] to add a step behind the last one.

5. Hold [SHIFT] while you press [LOAD] to insert a step in front of the current one.

6. Press [CLEAR] if you wish to delete the current step.

7. Press {Cue 0/00}.

Xciter user manual

Table of Contents