AMS Neve Logic MMC User Manual page 175

Appendix B: Ghost Recovery and Maintenance Procedure
The System will boot up from the floppy disk and you will be asked to confirm the type of Zip drive fitted. On
systems the Zip drive is IDE. Press I [Enter] to confirm.
You will be asked to confirm or cancel the Lock command. Press N [Enter] to cancel the Lock command.
The Lock command will have no effect at present, because either the hard disk is new (and therefore blank) or
the hard disk is still formatted with NTFS (the Lock command works with DOS FAT16 partitions).
The A: prompt will appear type ghost [Enter].
The Norton Ghost initial screen appears. Click on the OK box.
In the drop down menu go to Local, move across to Disk and click on To Image. A box will appear. Make sure
that Drive 1 is highlighted and click OK.
Select Drive C: (Zip Drive 100) from the drop down box and type in the filename Backup.GHO.
Click Save or press [Enter]. You will be asked if you want to Compress Image File, select High.
You will be prompted to Proceed with Image File, click Yes and the process Indicator screen will appear.
If the Boot hard disk contains additional data added by the user, more than one Zip disk may be needed to
complete the procedure.
You will be prompted to insert another disk if required, click Yes followed by OK. This will now continue until
complete.
Issue 4 Page B:2