Path Names; Mute List - AMS Neve Logic MMC User Manual

Lists Menu

Path Names

Allows a name to be assigned to any of the paths displayed in the list.
To name a path click on Path Names in the drop down Lists menu.
The Path Names dialogue box will appear.
Select the desired paths by clicking on the associated Path number or by pressing the Access keys on the desk.
The related System and User Names will appear in the System Name and User Name boxes.
Edit the User Name. A Name cannot contain more than four characters.
Click on Name. The new name will be inserted into the list.
To ensure that these names are saved with the Desk Setup, press KEEP DESK on the console surface.

Mute List

Displays the Event List with Mute events automatically selected.
The Event List shows
Timecode at which the event occurred - a special case of this is the Initial S.S. which is the initial snapshot of
the state of the control.
Event Type which is the type of control.
State which is the setting the control was changed to.
Name is the user name for the path the event took place on.
Path is the System Name for the path the event took place on.
Issue 4
Path Names
Page 22:2