AMS Neve Logic MMC User Manual page 162

Tools Menu
Encore data for the current user is shown in the top list. The current archives are shown in the bottom list. The
data structure within an archive is the same as the data structure for Encore.
When the Small icons check boxes are checked then more information can be shown in each list window.
To create a new Archive click the Create Archive Folder button. The New Archive Name dialogue box will be
displayed.
The name will default to the current date and time. To rename this, type in a new archive name.
To change the drive used for Archives click the drop down arrow for the Archive Directory box. Any existing
archives will be shown in the archive window.
To copy live data to an archive click on the required item in the Encore data window, click the + signs to expand
sub-sets of data, click on the target archive in the right hand window and click the BACKUP>> button.
A confirmation dialogue box will be displayed.
Click Yes. The data will be copied. If a sub-set of data was selected then the correct hierarchy will be
automatically used in the archive.
To restore data from an archive click on the required item in the Archive data window, click the + signs to
expand Archives and sub-sets of data an click the <<RESTORE button.
A confirmation dialogue box will be displayed.
Click Yes. The data will be restored to Encore.
Issue 4
Backup Manager
Page 24:38