AMS Neve Logic MMC User Manual page 108

Automation Menu
To jump to the start of the tree click the Goto Parent Tree icon.
To jump to the currently loaded revision click the Goto Loaded Revision icon.
The display will jump to show the loaded revision (Mix/Pass) in the top left hand corner.
Mix/Pass Notes
Notes in plain text can be applied to any Mix/Pass.
To add a note to a Mix/Pass right click on the required Mix/Pass number.
An Edit Notes dialogue box will be displayed.
Type in the required text using the keyboard and click Save.
These notes can be viewed by holding the mouse pointer over the particular pass on the Mix Tree. Alternatively
click the <<Quick Find button and a fly-out menu will show any passes that have had text added to it.
Milestones
A Mix/Pass can be marked as a 'milestone'. This is useful if a Mix/Pass in a long sequence is considered to be
significant in some way (e.g. it marks a finished scene). Milestones are protected from editing operations when
editing the Tree.
Milestones are also shown when the tree display is compressed.
Editing the Mix/Pass Tree
When a Mix/Pass Tree becomes very large, due to multiple refinements during a session, it may be desirable to
reduce the size of the Tree. This also reduces the amount of storage space used by the Tree on the Encore hard
disk.
This is done using the Prune Tree dialogue box. To display the Prune Tree dialogue box click the Edit Tree button.
It is necessary to turn the automation system off to edit the Mix/Pass Tree so a confirmation dialogue box is
displayed.
Click the Yes button. The Prune Tree dialogue box will be displayed.
Issue 4
Show Mix/Pass Tree
Page 19:7