Lists Menu; Label List; Capture Timecode; No Scrolling - AMS Neve Logic MMC User Manual

Lists Menu

Lists Menu

Label List

Allows users to create or capture (grab) a point in timecode (modify if required and assign a name to it).
To enable Timecode grabbing check the Create Labels On The Fly checkbox in the Label List dialogue box.
Click OK to return to the main screen.
To grab Timecode and create a Label 'on the fly' press any key on the keyboard when the main Encore screen is
displayed., first ensuring that the 'Create Labels On The Fly' box is checked.
If desired edit the timecode and click OK.
If Use Current Timecode After Pressing OK is checked then the Timecode will be grabbed again when OK is
clicked or Enter is pressed and that Timecode will be used for the Label.
Autoscroll List With Timecode
When this box is checked (enabled) and a tape plays the highlight bar moves through the Label List highlighting
each label as its point in timecode is reached.

Capture Timecode

Allows the current Timecode value to be captured and stored in Timecode Preset A.
To capture Timecode click on Capture Timecode in the drop down Tools Menu or press Ctrl-K on the Encore
keyboard (hold down the Ctrl key and press K).
If the 'Double Click To Locate' box is checked, then double clicking on a label on the main Encore page will take
all machines to that point in timecode.

No Scrolling

The labels do not scroll, and the highlight bar is fixed in position.

Scroll Labels

The labels will scroll up the screen as timecode advances. The highlight bar will remain in the same position, as
the labels scroll through it. This option allows the highlight bar to be moved up and down the screen by clicking
and dragging.

Scroll Selection

The labels will be displayed a page at a time. The highlight bar will drop down the list as each label is reached,
then return to the top of the page once the bottom is reached.
Issue 4
Label List
Page 22:1