Tools Menu; Desk Edit - AMS Neve Logic MMC User Manual

Tools Menu

Tools Menu

Desk Edit

Desk Edit is used to create, manage and modify the basic structure of Desk Setups.
The Desk Setup defines how many of each type of path is available, the processing allocated to each path, the
placement of paths on the console and the routing configuration. Desk Edit is used to setup the number of paths
and the signal processing.
To start a new Desk Setup click the New button.
Desk Edit will switch to the Config page if it is not already on top.
The Name box will display a default name using the date and time (e.g. Desk - 22/08 16:25).
The number of paths of each type will be 0, except for 1 Channel and 1 Track (bus).
The Current User Defaults box will show the same as the selection in the User Defaults for New Desk Setup box.
This determines the values that controls will be set to when they are cleared (i.e. reset).
To change the Desk Setup name type in the required name using the keyboard. This is also the name of the file
that will be used when the Desk Setup is saved.
The new Desk Setup is now ready to be defined. The minimal remaining steps in Desk Edit that are required to
start a functional Desk Setup are:
o Change Numbers of Paths so there are signal paths to work with.
o Assign paths to the fader strip with Desk Designer.
o Save the Desk Setup to permanent storage on the Encore hard disk.
Further refinements can be made in Desk Edit by:
o Changing Path Processing
o Changing Path Names
Issue 4
Desk Edit
Page 24:1