Table of Contents
Advertisement
Add a Static 802.1Q VLAN
The following figure and table describe the parameters that must be configured to add an 802.1Q
VLAN on the switch. Click the Show All Static VLAN Entries hyperlink to return to the Current VLAN
Entries table.
Figure 6- 22. 802.1Q Static VLANs Entry Settings – Add Screen
VLAN ID (VID)
The VLAN ID of the VLAN that is being created.
VLAN Name
The name of the VLAN that is being created.
Choose the module on which you want to define VLANs. A VLAN may exist on
Slot
multiple modules.
Port
Corresponds to the ports that will be members of the VLAN.
Specifies the port as either 802.1Q tagging or 802.1Q untagging. Checking the
Tag
box will designate the port as Tagging.
Specifies the port as not being a static member of the VLAN, but with no
None
restrictions for joining the VLAN dynamically through GVRP.
Specifies the port as being a static member of the VLAN. Egress Member Ports
Egress
are ports that will be transmitting traffic for the VLAN.
The CLI command to add a new VLAN is
command.
config vlan
Using the Web-based Management Software
DES-7000/DES-7100 Layer 2 Switch User's Guide
create
vlan. To select the member ports with CLI use the
68
Advertisement
Table of Contents
