Table of Contents
Advertisement
Rear Panel Views
Be sure to allow ample room at the
back of the Switch for proper ventilation.
Do not obstruct any vents on the Switch.
Please read and observe the cautionary
statement regarding removal of the
back panel.
The battery connection terminals are
used with battery back up systems.
These systems should be installed by a
qualified technician. Please contact
your vendor for information about
battery back up systems.
The RS-232 console port on the lower
right side of the rear panel is used with
DES-7012 RPS units only. The console
port is not used with DES-7011 RPS
units.
Do not remove the panels covering the power supply or any other panel covering
the back of the Switch.
WARNING
Figure 2 - 7. DES-7000 Battery Terminals and DES-7012 Management Console Port
Identifying External Components
DES-7000/DES-7100 Layer 2 Switch User's Guide
Figure 2 - 6. Rear panel of DES-7000
21
Advertisement
Table of Contents
