D-Link DES-7000 User Manual page 24

Figure 2 - 8. Rear panel of DES-7100
Do not remove the panels covering the power supply or any other panel covering
the back of the Switch.
WARNING
Figure 2 - 9. DES-7100 Battery Connection Terminals
Identifying External Components
DES-7000/DES-7100 Layer 2 Switch User's Guide
Do not obstruct the vent
on the back panel or on
any part of the Switch.
Please read and observe the cautionary
statement regarding removal of the back
panel.
The battery connection terminals are used
with battery back up systems. These
systems should be installed by a qualified
technician. Please contact your vendor for
information about battery back up systems.
The RS-232 console port is used with DES-
7012 RPS units only. The console port is not
used with DES-7011 RPS units.
22