DES-7000/DES-7100 Layer 2 Switch User's Guide
VLANs
Configure 802.1Q Static VLANs
The following figures and tables describe how to set up 802.1Q VLANs on the switch.
Figure 6- 21. 802.1Q Static VLANs Screen
The Static VLANs menu lists existing VLANs by their VLAN ID (VID) and by name. To create a new
VLAN, click on the New button in the header row of the table. To edit an existing VLAN, click on the
Modify button of the VLAN you want to edit. To eliminate an entire VLAN, click on the "X" button for the
VLAN you wish to delete.
The user configurable settings are the same when you Add or Modify a VLAN. Read the next section
for a description of these settings.
The CLI command to delete an existing VLAN is
vlan. To view existing VLANs use the
delete
command.
show vlan
Using the Web-based Management Software
67