Ports - D-Link DES-7000 User Manual

Layer 2 modular chassis-based switch
Hide thumbs Also See for DES-7000:
Table of Contents

Advertisement

Slot Numbering
Slot numbers on the chassis are labeled on the front panel of the fan tray modules for both the DES-
7000 and DES-7100. Each slot is given a Slot Name, Physical ID number and Logical ID number. Slot
numbering is permanent and absolute regardless of what type of module is installed. Management
modules may only be installed in the CPU slots. CPU slots for the DES-7000 are located in the
centermost slot positions and are labeled CPU-A and CPU-B. CPU slots for the DES-7100 are located
in the uppermost slot positions and are labeled CPU-A and CPU-B. Switch modules may be installed
in any of the remaining slots in any order regardless of the type of module. Refer to the tables in
Appendix B for Slot Name, Physical Slot ID and Logical Slot ID numbers.

Ports

DES-7003 CPU/Uplink Module
§
1 RJ-45 Management Port (Mgmt) dedicated Switch management through Telnet or Web-
based management
§
1 RJ-45 Console Port for out-of-band management and system configuration (requires adapter
included with Switch)
§
6 GBIC Gigabit Ethernet Ports for Uplinking Switch to network backbone
§
LED Indicators for monitoring status, system alerts and hot swapping
DES-7005 Ethernet/Fast Ethernet Module
§
24 10BASE-T/100BASE-TX RJ-45 Ports
§
All ports support auto-polarity detection (MDI-X/MDI-II)
§
Connects to 10BASE-T and 100BASE-TX devices at full- or half-duplex
§
Supports Category 3, 4, 5 or better UTP or STP connections of up to 100 meters each
§
LED Indicators for per port link/activity and speed (above each port) plus hot swapping and
module status
DES-7006 100BASE-FX (SFF) Fast Ethernet Module
§
24 100BASE-FX (SFF) Fast Ethernet ports
§
Connects to 100BASE-FX devices at full- or half-duplex
§
Fully compliant with IEEE 802.3u 100BASE-FX
§
IEEE 802.3x compliant Flow Control support for Full duplex
§
LED Indicators for link/activity (one above each port) plus hot swapping and module status
DES-7010 Ethernet over VDSL Module
§
2 RJ-21 Ports for connection to 24 clients (ports)
§
Compliant with ETSI VDSL requirements
§
Supports symmetrical data transfer
§
LED Indicators for per port link status (grouped on right side of front panel) plus hot swapping
and module status
Identifying External Components
DES-7000/DES-7100 Layer 2 Switch User's Guide
23

Advertisement

Table of Contents
loading

Table of Contents