Table of Contents
Advertisement
Switch Network Module LED Indicators
The different network modules for the Switch present different arrangements for the per port LED
indicators.
Switch Module LED Indicators
Power
Hot Swap & Card
Status
Per Port Indicators
Identifying External Components
DES-7000/DES-7100 Layer 2 Switch User's Guide
Figure 3- 3. DES-7005 LED Indicators
Figure 3- 4. DES-7006 LED Indicators
Figure 3- 5. DES-7-10 LED Indicators
Steady green light indicates normal voltage status in this module.
Amber light indicates a voltage problem with this module.
This will begin to blink amber when a hot swap of the unit has been
initiated. It should begin blinking immediately after the Hot Swap
button has been pushed. After a few seconds the module will be
powered off and it may be safely removed.
Switch modules include per port LED indicators that differ for each
module.
The DES-7005 has one indicator per port for link/activity and another
per port indicator for speed above each port.
The DES-7006 has one per port indicator for link/activity above each
port.
The DES-7010 has per port indicators for link status on the right side
of the front panel.
25
Advertisement
Table of Contents
