Table of Contents
Advertisement
Edit 802.1Q VLANs
The following figure and table describe how to edit an existing 802.1Q VLAN entry on the switch.
Figure 6- 23. 802.1Q Static VLANs Entry Settings – Edit Screen
The Static VLANs Edit screen presents the current configuration of the VLAN. Use this screen to
change settings for the VLAN as described in the table below. Click the Show All Static VLAN Entries
hyperlink to return to the Current VLAN Entries table.
The VLAN ID of the VLAN to be edited. For editing, VLANs are identified by
VLAN ID (VID)
name.
VLAN Name
The name of the VLAN to be edited.
Choose the module on which you want to define VLANs. A VLAN may exist on
Slot
multiple modules.
Port
A list of the ports that are static members of the currently selected VLAN.
Specifies the port as either 802.1Q tagging or 802.1Q untagging. Checking the
Tag
box will designate the port as Tagging.
Specifies the port as not being a static member of the VLAN, but with no
None
restrictions for joining the VLAN dynamically through GVRP.
Specifies the port as being a static member of the VLAN. Egress Member Ports
Egress
are ports that will be transmitting traffic for the VLAN.
Click Apply to let your changes take effect.
The CLI command to change the configuration of an existing VLAN is
Using the Web-based Management Software
DES-7000/DES-7100 Layer 2 Switch User's Guide
config
vlan.
69
Advertisement
Table of Contents
